FAQ

Fre­qent­ly asked questions.

Plea­se choo­se your topic:

In Gene­ral

Logo
  1. CAN bus wiring test
  2. CAN Sym­bo­ledi­tor Manual
  3. CAN­BUS­view XL III, CAN Quick Tes­ter C‑QT15 and Device­N­et Analyzer
  4. CAN­touch vs. CAN-Bus Tes­ter 2, the decision
  5. Detec­tion of short cir­cuits in the CAN bus – Error patterns
  6. Exch­an­ge ser­vice for fieldbus dia­gno­stic devices
  7. Repair, com­plaint, customs
  8. Ret­a­king of old devices
  9. Sug­gested bit timing and bus length
  10. Trunk and drop line lengths

  1. 30 days Tri­al Time
  2. After firm­ware update, node mea­su­re­ment is dis­play­ed as locked
  3. Ana­ly­ze mea­su­re­ments at your pc
  4. Assign­ment of D‑Sub9 socket on CAN­touch and CAN-Bus Tes­ter 2
  5. Back­ground Picture
  6. CAN bus wiring test
  7. CAN Sym­bo­ledi­tor Manual
  8. CAN­touch does not reco­gni­ze your spe­cial baud rate
  9. CAN­touch vs. CAN-Bus Tes­ter 2, the decision
  10. Con­ver­ting CAN­touch Trace Files
  11. Detec­tion of short cir­cuits in the CAN bus – Error patterns
  12. Exch­an­ge ser­vice for fieldbus dia­gno­stic devices
  13. How is a bat­tery chan­ge done?
  14. How to install a soft­ware update
  15. Install a licen­se file
  16. Main­ten­an­ce and Calibration
  17. Pre-defi­­ned Node Lists
  18. Pro­blems with dri­ve N1
  19. Pro­to­col Moni­tor Trans­mit List
  20. Rating file – adjust rating thres­holds individually
  21. SAE J1939 only show­ing 250kBit/​s
  22. Some hints for sym­bo­lic decoding
  23. The pos­si­ble num­ber of screenshots
  24. Which CAN­­touch-Fir­m­­wa­re fits to which CAN-Bus Tes­ter 2 Software ?
  25. Working with projects

  1. CAN Sym­bo­ledi­tor Manual
  2. CAN­vi­si­on licen­se model
  3. CAN­vi­si­on Ser­ver – Use over a Network
  4. Con­ver­ting CAN­touch Trace Files
  5. Import of CAN­touch trace data
  6. SAE J1939 cus­tom PGN decoding
  7. Send list: move mes­sa­ge into sequence

  1. CAN­BUS­view XL III, CAN Quick Tes­ter C‑QT15 and Device­N­et Analyzer
  2. How to install a new licen­se file
  3. The con­nec­tion of the CANalarm for pro­gramming purposes

  1. 50/​60 Hz ripp­le when the tes­ter is connected
  2. Assign­ment of D‑Sub9 socket on CAN­touch and CAN-Bus Tes­ter 2
  3. CAN bus wiring test
  4. CAN Sym­bo­ledi­tor Manual
  5. CAN­BUS­view XL III, CAN Quick Tes­ter C‑QT15 and Device­N­et Analyzer
  6. CANopen pro­to­col moni­tor vs. CANopen bus system
  7. CAN­touch vs. CAN-Bus Tes­ter 2, the decision
  8. Com­mon Mode Measurement
  9. Con­nec­tion bet­ween firm­ware – FPGA – PC soft­ware (CBT2 does not measure)
  10. Error­frames: which node sent the message
  11. Exch­an­ge ser­vice for fieldbus dia­gno­stic devices
  12. How to load a new licen­se file
  13. How to use a file with an addi­tio­nal baud rate
  14. Import of CAN­touch trace data
  15. Licen­ses of the pro­to­col moni­tor are not recognized
  16. ON-LED flas­hes yel­low, no func­tion, not reco­gni­zed by PC
  17. Pro­blems with the USB con­nec­tion at the CBT2
  18. SAE J1939 cus­tom PGN decoding
  19. Send list: move mes­sa­ge into sequence
  20. Tes­ter shows non exis­tend error-frames
  21. Trig­ger DSO with the CBT2
  22. Trig­ger Out­put CBT2
  23. Which CAN­­touch-Fir­m­­wa­re fits to which CAN-Bus Tes­ter 2 Software ?

CAN­ob­ser­ver
  1. Auto­ma­ted con­trol of CANobserver
  2. How to update firm­ware older than 1.17
  3. Ixxat CAN­ob­ser­ver, firm­ware­up­date not possible
  4. Obso­le­te Soft­ware Download

CAN-Bus Tes­ter
  1. Obso­le­te Soft­ware Download
  2. Sup­port of Win­dows 7/8/8.1/10

Pro­fi­bus Tes­ter 2

Pro­fi­bus Tes­ter 3