CAN­vi­si­on Ser­ver – Use over a Network

CAN­vi­si­on can be used over the net­work. The com­pu­ter con­nec­ted to the CAN requi­res the licen­se don­gle with at least one licen­se and a star­ted CAN­vi­si­on ser­ver. The respec­ti­ve CAN inter­face must be expli­cit­ly shared and can then be found by other com­pu­ters in the network.

Not only does the ser­ver estab­lish the con­nec­tion to the net­work, but it also enables com­mu­ni­ca­ti­on with the CAN net­work via inter­faces from dif­fe­rent manu­fac­tu­r­ers. It is the con­nec­ting dri­ver lay­er bet­ween the dri­vers of the inter­face manu­fac­tu­r­ers and the CAN­vi­si­on cli­ent win­dows. The ser­ver is the­r­e­fo­re also a requi­re­ment for com­mu­ni­ca­ti­on on a sin­gle workstation.

CAN­vi­si­on: Network

Softwareinterface für gemac, ixxat, hms, peak, kvaser, vector

CAN­vi­si­on: local

Back to FAQ overview

Back to FAQ overview

Article last edited on Article first published on
2019/​03/​28 2019/​03/​27