Fieldbus blog

Detection of swapped CAN lines

https://gemac-fieldbus.com/wp-content/uploads/2021/03/Busstatus-blinking-red_200.png 200 200 GEMAC-fieldbus-Admin https://media.gemac-chemnitz.com/logo/GEMAC-fieldbus-logo-main.svg GEMAC-fieldbus-Admin2021-03-01 08:36:282021-03-01 09:23:28Detection of swapped CAN lines

CANtouch – new software version 2.38

News

https://gemac-fieldbus.com/wp-content/uploads/2019/11/SW-Version‑2.38.png 238 250 Ralf Meischner https://media.gemac-chemnitz.com/logo/GEMAC-fieldbus-logo-main.svg Ralf Meischner2019-11-08 14:51:012021-01-12 15:24:10CANtouch – new software version 2.38

Vattenfall solar team measures

News

https://gemac-fieldbus.com/wp-content/uploads/2019/09/CANtouch-BridgestoneSolarRace2019-2_1000x666.jpg 666 1000 GEMAC-fieldbus-Admin https://media.gemac-chemnitz.com/logo/GEMAC-fieldbus-logo-main.svg GEMAC-fieldbus-Admin2019-09-20 11:47:322021-01-12 11:14:28Vattenfall solar team measures

CANtouch – new measurement Level Ratio

News

https://gemac-fieldbus.com/wp-content/uploads/2019/09/Levelratio.jpg 180 272 GEMAC-fieldbus-Admin https://media.gemac-chemnitz.com/logo/GEMAC-fieldbus-logo-main.svg GEMAC-fieldbus-Admin2019-09-13 14:02:502020-07-29 12:23:21CANtouch – new measurement Level Ratio

Softwareupdates 08/2019

News

https://gemac-fieldbus.com/wp-content/uploads/2019/08/logo-kvaser‑2.png 200 200 GEMAC-fieldbus-Admin https://media.gemac-chemnitz.com/logo/GEMAC-fieldbus-logo-main.svg GEMAC-fieldbus-Admin2019-08-29 15:18:362021-01-13 14:10:21Softwareupdates 08/2019

Analyzing bus load

Knowledge

It sounds simple at first to analyze the bus load on a CAN bus. But there are a few things to consider before making conclusions.

20. November 2018

https://gemac-fieldbus.com/wp-content/uploads/2018/11/Busload-featured_image.png 272 272 Ralf Meischner https://media.gemac-chemnitz.com/logo/GEMAC-fieldbus-logo-main.svg Ralf Meischner2018-11-20 13:18:532020-07-29 12:12:22Analyzing bus load

Expectations and technical limits

Knowledge

This is necessary to use measuring instruments effectively.

14. June 2018

https://gemac-fieldbus.com/wp-content/uploads/2018/06/kein_Plan_600x477‑1.jpg 477 600 Ralf Meischner https://media.gemac-chemnitz.com/logo/GEMAC-fieldbus-logo-main.svg Ralf Meischner2018-06-14 15:15:122019-08-16 14:10:20Expectations and technical limits

Trial mode for CANvision

News

14. June 2018

https://gemac-fieldbus.com/wp-content/uploads/2018/04/Trialmodus.png 289 311 GEMAC-fieldbus-Admin https://media.gemac-chemnitz.com/logo/GEMAC-fieldbus-logo-main.svg GEMAC-fieldbus-Admin2018-04-25 12:33:042019-08-26 15:53:08Trial mode for CANvision

ISOBUS measurement and analysis

Knowledge

Fantastic possibilities in agriculture.

6. March 2018

https://gemac-fieldbus.com/wp-content/uploads/2018/03/ip_272x220.png 220 272 Ralf Meischner https://media.gemac-chemnitz.com/logo/GEMAC-fieldbus-logo-main.svg Ralf Meischner2018-03-06 16:00:262019-08-05 08:33:15ISOBUS measurement and analysis

Software Updates in February 2018

News

6. March 2018

https://gemac-fieldbus.com/wp-content/uploads/2018/01/CANtouch_V2.3_EN.png 480 272 GEMAC-fieldbus-Admin https://media.gemac-chemnitz.com/logo/GEMAC-fieldbus-logo-main.svg GEMAC-fieldbus-Admin2018-01-17 16:27:162018-11-19 14:27:11Software Updates in February 2018

Software-Updates in October 2017

News

6. March 2018

https://gemac-fieldbus.com/wp-content/uploads/2017/10/barview-extended_cropped.png 271 272 Ralf Meischner https://media.gemac-chemnitz.com/logo/GEMAC-fieldbus-logo-main.svg Ralf Meischner2017-10-27 10:06:192018-11-19 14:30:05Software-Updates in October 2017

New Software versions for CANtouch, CBT2 and CANvision

News

6. March 2018

https://gemac-fieldbus.com/wp-content/uploads/2017/06/Screenshot-SW-Version‑2.1.png 240 250 Ralf Meischner https://media.gemac-chemnitz.com/logo/GEMAC-fieldbus-logo-main.svg Ralf Meischner2017-06-28 12:19:092021-01-18 13:37:30New Software versions for CANtouch, CBT2 and CANvision

Page 1 of 212

CANtouch

Fieldbus Diagnosis

The smart and intuitive mobile diagnostic device for physical and logical layers.

20. April 2016

https://gemac-fieldbus.com/wp-content/uploads/2016/04/CANtouch_Homescreen_Dt_384x384.png 384 384 Ralf Meischner https://media.gemac-chemnitz.com/logo/GEMAC-fieldbus-logo-main.svg Ralf Meischner2016-04-20 15:24:292021-11-01 11:03:33CANtouch

CANvision

Fieldbus Diagnosis

Protocol analysis tools as if made from one piece.

19. April 2016

https://gemac-fieldbus.com/wp-content/uploads/2016/04/CANvision-Fenster-Montage-1500x1500.jpg 1500 1500 Ralf Meischner https://media.gemac-chemnitz.com/logo/GEMAC-fieldbus-logo-main.svg Ralf Meischner2016-04-19 15:25:242019-08-05 08:49:33CANvision

CANalarm

Fieldbus Diagnosis

The clever diagnosis tool for logical bus analysis.

19. April 2016

https://gemac-fieldbus.com/wp-content/uploads/2016/04/CANalarm_1000x1000‑1.jpg 1000 1000 Ralf Meischner https://media.gemac-chemnitz.com/logo/GEMAC-fieldbus-logo-main.svg Ralf Meischner2016-04-19 15:24:522021-11-01 11:10:45CANalarm

CANobserver

Fieldbus Diagnosis

Permanent monitoring the physical layers of your bus.

19. April 2016

https://gemac-fieldbus.com/wp-content/uploads/2016/04/CANobserver_1000x1000.jpg 1000 1000 Ralf Meischner https://media.gemac-chemnitz.com/logo/GEMAC-fieldbus-logo-main.svg Ralf Meischner2016-04-19 15:20:142021-11-01 11:11:45CANobserver

CAN‑Bus Tester 2

Fieldbus Diagnosis

The classic measurement tool for physical and logical layer analysis.

19. April 2016

https://gemac-fieldbus.com/wp-content/uploads/2016/04/CAN-Bus-Tester-2-Montage-Koffer-1000x1000.jpg 1000 1000 Ralf Meischner https://media.gemac-chemnitz.com/logo/GEMAC-fieldbus-logo-main.svg Ralf Meischner2016-04-19 15:19:072021-11-01 11:08:59CAN‑Bus Tester 2

Fiel­dbus blog

Fieldbus blog